80% Products

Our complete jig for completing the machining of a tactical Machining 80% TM-10 Lower Receiver Learn More

The operations this jig covers are as follows: Drill Barrel Hole Drill and Tap Barrel Clamp holes Drill Bolt Stop Drill Trigger Assembly holes Drill and Tap Stock retention hole Cleaning Rod Hole (optional) While the tasks are easier to complete with the 80% 10/22 it is extremely critical that the jig and your drill press is level. Do not remove the jig in between operations on the side youre currently working from. This is especially important for the barrel & barrel clamp holes. They must be precisely placed. Also, do not drill all the way through the receive ron he bolt stop & trigger assembly, these are required to be flipped as the drill will walk. Tool Information .188 Drill .250 Drill #16 Drill 12-24 Tap 11/16 Drill 5/16 Drill Extended Reach OAL 6 3/8 You will also need to find a long drill for the charging handle retainer or use a sharpened punch. We reccomend sharpening a long punch and hitting it through the barrel hole. Learn More

Our complete jig for completing the machining of a Tactical Machining 80% AR-15 lower receiver Learn More

TM-10 Plate A for the TM-10 80% lower receiver has clearance holes for drilling through the receiver Learn More

TM-10 Plate B for the TM-10 80% lower receiver has drill guides for drilling through the receiver Learn More

AR-10 Plate B for the AR-15 80% lower receiver has drill guides for drilling through the receiver Learn More

AR-15 Plate A for the AR-15 80% lower receiver has clearance holes for drilling through the receiver Learn More

Replacement piece for TM-15 or TM-10 jig plate, this is the plate marked TM-1002 3/8 endmill 1-1/4 length of cut Learn More

Replacement piece for TM-15 or TM-10 jig plate, this is the plate marked TM-1003 5/16 endmill 3/8 shank Learn More