Blueprints for TM-10 & TM-15 Availability ?

Discuss assembling your own rifle or building it from scratch with our 80% Lower Receivers.

Blueprints for TM-10 & TM-15 Availability ?

Postby Dr69er » Mon Aug 15, 2011 8:47 pm

Silly Question, I didn't see anywhere on the TM site offering blueprints for the TM-10 & TM-15...
So are they available from TM ?

They would be needed mostly to confirm correct dimentions/specs when working on TM 80% forgings
and such...I've seen only one source (BH) w/ a free blueprint of a AR-15 lower...

Anyone know of any other sources for correct AR-15/AR-10 prints ?
Dr69er
 
Posts: 43
Joined: Thu Jun 16, 2011 10:53 am

Re: Blueprints for TM-10 & TM-15 Availability ?

Postby Nathan » Tue Aug 16, 2011 8:24 am

Sorry but we do not have prints for distribution.

There are prints for the AR-15 out there. However I have never seen a correct print for the .308 DPMS pattern AR out on the web. The ones for the AR-10 are not the same.

If you follow the jigs you will be fine. Remember not to ride the top plates. Also the .308 has virtually the same fire control pocket.
Nathan
Tactical Machining
1270 Biscayne Blvd
Deland, FL 32724
Phone 386-490-4464
fax 386-490-4890
Nathan
 
Posts: 195
Joined: Tue Feb 09, 2010 10:13 am

Re: Blueprints for TM-10 & TM-15 Availability ?

Postby K7USC » Mon Oct 24, 2011 8:31 am

To Nathan:

You mean that you do not have a PDF of the blueprints for all the lowers that I have purchased that you can e-mail your customers? What are you guys working off of in your shop? It would help greatly to know the depth of cut to the floor of the fire control area of the blank before writing a pocket routine to mill out the fire control area as well as what you guys are using for a "DATUM" on the part for both the AR-15 and AR-10 configurations.

Very respectfully,
David
K7USC
 
Posts: 1
Joined: Mon Oct 24, 2011 8:23 am

Re: Blueprints for TM-10 & TM-15 Availability ?

Postby Nathan » Mon Oct 24, 2011 8:34 am

David,

Sorry but due to some ITAR regs we can't send out prints.

The jig top plates do have the LOC (length of cut=depth) engraved on them.

Wish I could be of more help.

Nathan
Nathan
Tactical Machining
1270 Biscayne Blvd
Deland, FL 32724
Phone 386-490-4464
fax 386-490-4890
Nathan
 
Posts: 195
Joined: Tue Feb 09, 2010 10:13 am

Re: Blueprints for TM-10 & TM-15 Availability ?

Postby fslflint » Fri Nov 18, 2011 10:18 am

a picture of the top plate of the mill jig with dimensions overlaid would be useful.
fslflint
 
Posts: 1
Joined: Fri Nov 18, 2011 10:12 am

Re: Blueprints for TM-10 & TM-15 Availability ?

Postby sjrunner » Fri Dec 02, 2011 3:36 am

Nathan wrote:Sorry but we do not have prints for distribution.

There are prints for the AR-15 out there. However I have never seen a correct print for the .308 DPMS pattern AR out on the web. The ones for the AR-10 are not the same.

If you follow the jigs you will be fine. Remember not to ride the top plates. Also the .308 has virtually the same fire control pocket.


There's got to be someone out there that has a finish lower that maybe can give dims. for the pocket
sjrunner
 
Posts: 1
Joined: Fri Dec 02, 2011 3:20 am

Re: Blueprints for TM-10 & TM-15 Availability ?

Postby Nathan » Fri Dec 02, 2011 1:12 pm

The actual FCG pocket is virtually identical. Locating is where you are going to have difficulty.
Nathan
Tactical Machining
1270 Biscayne Blvd
Deland, FL 32724
Phone 386-490-4464
fax 386-490-4890
Nathan
 
Posts: 195
Joined: Tue Feb 09, 2010 10:13 am

Re: Blueprints for TM-10 & TM-15 Availability ?

Postby Dr69er » Fri Jan 27, 2012 5:02 pm

OK got my new CAD computer program...OMG, it is going to be a beast to try to retrain/learn all the features and geometry and trig. calculations/funtions on this new program... :ugeek:

Well anyway, my college/university days were well over 20 years ago :shock: I was thinking to do
a CAD blueprint for those that may be Interested of a DPMS/LR-308 pattern lower blueprint. I was
thinking for nominal fee of $9.99 for a ANSI size B,C, or possibly a size D blueprint for members
of this forum etc.

Even if I can't get the CAD program to work for some reason I will do the print the old fashioned
way by hand...and then have the print professionally copied and printed on the plotter...

Let me know what you guys think...I also updated the website, and have a section on the difference
between a standard mil-spec. AR-15 stripped lower vs. a DPMS/LR-308 stipped lower (pictured) and
other AR related Info.

Below is the website and email link for chiming-in:

http://illirianengineeringc.ipage.com

IllirianEngineering@yahoo.com
Dr69er
 
Posts: 43
Joined: Thu Jun 16, 2011 10:53 am

Re: Blueprints for TM-10 & TM-15 Availability ?

Postby Dr69er » Wed Feb 29, 2012 12:48 am

Update, I have recieved several requestes for DPMS LR-308 Platform Blueprints...We will have them
ready in two weeks or so, we will also have AR-15 Style Blueprints available as well.

The Blueprints will be printed on B size (11X17) paper and will Include a seperate print detailing
drilling locations as well as the various drill bits and endmills needed to complete your project.

The prints will be geared towards dedicated 80% PCR builds, their will be no extra and confusing
dimensions on the blueprints, It will be made easy for the average builder to read and understand.

AR-15 Style/Type or DPMS LR-308 Platform Blueprints will be $15 per set delivered to lower 48 states.
If you want both the AR-15 & DPMS LR-308 Platform print sets it will be $25 delivered to the lower 48
states.

We will also add more 80% build Info. on the proper technics for layout work on your lower before
starting your drilling and milling work on your 80% lower reciever. We may even do a Youtube video.

For those who are Interested please email us at: IllirianEngineering@yahoo.com.
You can also visit us at: http://illirianengineeringc.ipage.com

Please support this forum and the woderfull people at TM.
Last edited by Dr69er on Sat Mar 31, 2012 9:29 pm, edited 1 time in total.
Dr69er
 
Posts: 43
Joined: Thu Jun 16, 2011 10:53 am

Re: Blueprints for TM-10 & TM-15

Postby Dr69er » Sat Mar 31, 2012 1:58 pm

The 80% PCR Specific DPMS LR-308 pattern Blueprints/Shop prints are ready today and will
ship-out on Monday for those who have pre-paid for the prints. The print set also
Includes a specific drill and mill location print to make it much simpler and easier
for the average home builder...

For those who are Interested in a set of prints they can be ordered through our website
or email us at illirianengineering@yahoo.com for futher details...


http://illirianengineeringc.ipage.com/


Please support this site and the wonderfull people here at TM.
Dr69er
 
Posts: 43
Joined: Thu Jun 16, 2011 10:53 am

Next

Return to Build it yourself

Who is online

Users browsing this forum: No registered users and 2 guests

cron