Review Details

AR-15 Jig - 80% Receivers

Product Review (submitted on March 16, 2015):

I used TM's jig to complete 4 80% lowers. I used a drill press and an end mill to complete the process. Each one took aprox 60 min to complete from start to finish. With this jig you only have to worry about the depth of each cut. The rest was paint-by-colors easy. So easy I ordered 4 more of their gen 2's to complete next. Should take only half the time since the rear lug is already cut out. Prior to this, I have zero machining experience.

Thanks TM